
Got a question? Call us!
FREE LIFETIME WARRANTY
ADDITIONAL INFORMATION
| SKU | 68397063 |
|---|---|
| Condition | Refurbished |
| Make | JEEP |
| Model | Cherokee |
| Regular Price | $388.70 |
| Sale Price | $299.00 |
| Stock | IN STOCK |
2019 Jeep Cherokee 2.4L PCM
Overview of 2019 Jeep Cherokee 2.4L Electronic Control Module
The 2019 Jeep Cherokee ECM for the KL’s 2.4L Tigershark I4 refines engine and 9-speed transmission management, updated for the 2019 model year’s facelift. Compatible with Latitude and Altitude trims, this module supports MultiAir and CAN-bus diagnostics.
Specifications for 2019 Jeep Cherokee 2.4L ECM
- Engine Fitment: 2.4L I4, enhancing fuel efficiency.
- Transmission Compatibility: ZF 9-speed automatic.
- Part Numbers: 683XXXX series (check match).
- Diagnostics: CAN-bus OBD-II for 2019 standards.
2019 Jeep Cherokee 2.4L Features
- Optimizes MultiAir valve timing for 2019 Cherokee models.
- Supports 2019 emissions requirements with updated sensors.
- Compatible with 2019 KL’s facelifted Uconnect features.
- Improves 9-speed shift performance over 2018.
2019 Model Year Context
The 2019 Jeep Cherokee 2.4L ECM enhances the KL platform’s electronics, with firmware supporting the 2019 facelift’s styling and tech updates. It processes MAF and throttle sensor data, ensuring efficiency for the 2019 Cherokee’s 2.4L engine, critical for its daily driving reliability.
HOW DOES IT WORK?
Not sure this will work? Order RISK-FREE!
BUYER BEWARE! NOT ALL COMPUTER SELLERS ARE EQUAL.
We are the ONLY company that runs every computer through a computer aided vehicle simulator to test for quality and compatibility with your car & VIN.
OVER 150,000 Customers Served
Every unit is programmed & tested in our facility in Cary NC
CarComputerExchange fully rebuilds and tests ALL computers. We are the ONLY seller that runs each computer through a computer aided vehicle simulator that tests every circuit in the module. Other companies run limited tests.
Most companies run limited tests. Some online stores simply repaint old units and sell without testing. Don't fall for the CHEAPER option.
Our testing & rebuilding process starts with a deep visual evaluation of the circuit board and all the electronic components. From water or acid corrosion, to fire or burn damage, we pay attention to every detail. We also scan the ECU memory or CPU to make sure that it is working properly.
We then test the ECU's with our proprietary electronic lab equipment on our bench, which emulates the car's engine to ensure accuracy in every diagnosis.
Your cart
Checkout securely
